Shopping Cart
Total:
$0.00
Storing Your Bike is Easy With Cycloc!
The Solo, Hero and Super Hero are ideal if you have wall space but want to minimise how far your bike sticks out from the wall.
The Solo allows you the flexibility of hanging your bike horizontally or vertically. The vertical option is ideal if you have height but not much wall width.
As the bike sits at an angle on the Hero / Super Hero then you can win a bit of extra space by installing the unit higher up the wall. Perfect in areas like narrow hallways! You can even tier units to allow you to store one bike above another.
If you have minimal wall space but have some room depth to play with the Endo could be for you. The Endo also allows you to create dense installations of multiple bikes.
For more examples of how to set out each product then please refer to the product data sheets and please give us a call if you are still not sure.
Cycloc products are not intended as security products and do not carry any formal security certification.
We are aware that casual theft is an issue, especially in communal storage areas, so we have incorporated ways to lock you bike to your wall mounted Cycloc product to deter opportunism and keep your bike a bit more secure in shared space.
Yes! All Cycloc storage products (excluding the Wrap) come with a one year (365 day) warrantee, from date of original purchase.
Cycloc wall storage products were not originally designed for outdoor use. However several customers have successfully installed them in in controlled access outdoor spaces such as carports, courtyards and rear gardens. The Polypropylene they are manufactured from is UV stable.
So, to get the best out of your Cycloc product, our recommendation is that you install it inside your home / office / shop or at least in a place that is sheltered from direct sun or extreme cold eg garage, shed etc.
All products except the Solo come with fixings included. All supplied fixings and wall plugs are suitable for installation into masonry. The supplied fixings are NOT suitable for plasterboard/drywall without swapping out the wall plug to an appropriate wall plug/anchor for plasterboard.
Due to the nature of the loading with the Solo, you will need to select a fixing suitable for the type of wall you are installing the product on, whether that be solid brick/block, plasterboard/drywall or timber.
The product data sheets provide guidance on how to install your Cycloc product including advice on suitable fixing types suitable for each type of wall and drilling templates to help you with the installation process.
We have carried out comprehensive loading tests on each of our wall mounted products for both solid masonry and plasterboard (drywall). The maximum recommended static loads in each case are provided in the FAQs and data sheet for each product along with suitable fixing types for each type of wall.
Due to potential for variability in wall condition and installation quality we cannot guarantee this loading is possible for all situations. Load capability is also dependent on selection of fixings suitable for the wall you are fixing the product to and the skill of the installer.
If you are not confident installing your product, we recommend you find a competent tradesperson to install your Cycloc product for you.
If you are a specifier looking to purchase multiple Cycloc products for a commercial installation, then please get in touch as we may be able to offer a trade discount.
Someone purchased a
